Panasonic KX-TCD400RUB

KX-TCD400RUB I KX-TCD400RUC I KX-TCD400RUF I KX-A140RUB I KX-A140RUC I KX-A140RUF
Editing a Caller Information
1 ® 2
Press Search/Select Select"EDiT".
PHONEBOOK.*1 ^sired item.
<Phone Number>
4 The 1st digit of the
desired phone
number blinks.
5 © 6 ©
Move cursor. Press CLEAR.*2
<Name>
8 © 9 ©
Move cursor. Press CLEAR.*2
AND/ Number 7 (1=Г)
OR
Edit the phone Press OK.
number.*3
AND/ Name W ( Ш )
OR
Edit the name.*4 Press OK.
Clearing a Caller Information
1 ©
©G
©G
^ ©G
Press
Search/Select Search/Select Search/Select
PHONEBOOK.*1 desired item.
"CLEAR".
"YES ".*5
Dialling with the Phonebook
1 ©
2 Q
3 § )
Press
Search
Press TALK.
PHONEBOOK.
‘1 desired item.
• To exit the operation, press <§) any time.
*1 If there is no item stored in the phonebook, the display shows "no item " .
*2 Digits are cleared to the left of the flashing digit.
*3 Digits are added to the left of the flashing digit. If you need to clear or add more than one digit, repeat the steps from 5.
*4 Characters are added to the left of the flashing character. If you need to clear or add more than one character, repeat the
steps from 8.
*5 To continue clearing another caller information, repeat the steps from 2.
8.5.2. Storing the Phone Number into the Phonebook When Pre-dialling
7 Phone Number *1 2
5 <S>
({§D 3 (Щ) 4 Name
Press OK to Press OK twice. Enter name,
store the number.
Press OK.
• To exit the operation, press <§) any time.
*1 If you need correction, press CLEAR. Digit is cleared to the left, then enter numbers.
23