Station Features and Operation (DPT/SLT)
104 User Manual
<PT>
• Pressing the Account button (flexible button) while entering an account code cancels the
entry.
• If an entered account code does not match the pre-assigned account code, in the verified-
all calls mode or the verified-toll restriction override mode;
a) When making an outside call, a reorder tone is returned.
b) During a conversation, the code entry is accepted and the call is maintained (= Option
mode).
c) After a CPC signal
*1
has been detected, the code entry is accepted (= Option mode).
• Account button
The Account button can be used instead of dialing the feature number. It can be assigned
to a flexible (CO, DSS, PF) button by Station, User or System Programming.
<SLT>
• You cannot enter an account code during a call or while hearing a reorder tone.
• Flashing the hookswitch while entering an account code cancels the entry.
Programming Guide References
[105] Account Codes
[508] Account Code Entry Mode
[601] Class of Service
Features Guide References
Station Message Detail Recording (SMDR)
User Manual References
2.2.2 Flexible Button Assignment
4.3.83 Toll Restriction Override by Account Code Entry
*1
A Calling Party Control (CPC) signal is an on-hook indication sent from a CO line when the other end hangs up. You hear a
reorder tone when then signal is detected.
To Next Page
Loading...
