Station Features and Operation (DPT/SLT)
User Manual 189
Conditions
• Flash Time
The flash time must be assigned as required by the Centrex, host PBX or outside line.
<PT>
• Memory Dialing
During outside calls, a FLASH stored in System Speed Dialing, Station Speed Dialing
or One-Touch Dialing works as External Feature Access, not as Flash (Disconnect
Signal).
<SLT>
• This feature does not function, if an SLT has a call on Consultation Hold.
Programming Guide References
[413] Flash Time
[990] System Additional Information
User Manual References
4.3.47 Flash [PT only]
To Next Page
Loading...
