Why can't I make outside calls, transfer calls, or conference on my Panasonic KX-TDA100?
If you cannot make outside calls, transfer calls, or start a conference, the corresponding CO button may not exist on the PT. Program the CO button.
What does it mean when the LED of the CS stays Red ON during normal operation on Panasonic KX-TDA100 PBX?
If the LED of the CS stays Red ON during normal operation, it indicates a CS malfunction. Replace the CS.
Why is there no sound when using the speakerphone on a Panasonic PBX APT?
If you can't hear anything when using the speakerphone on an APT, the HANDSET/ HEADSET selector might be set to the "HEADSET" position. When the headset is not used, set the HANDSET/HEADSET selector to the "HANDSET" position.
Why isn't Alternate Calling working correctly on my Panasonic KX-TDA100 PBX with a wireless phone?
Voice-calling mode and Hands-free mode with LCS are not available with Wireless Phones. Switch the calling mode to ring-calling. Set the LCS mode to "Private".
Why doesn't my Panasonic PBX PT ring?
If your PT does not ring, the ringer volume may be off. Turn on the ringer volume.
Why don't some Panasonic KX-TDA100 PBX extensions work during a power failure?
During a power failure, if extensions connected to specific ports aren't working, it could be due to: * A DPT or APT being connected to the extension port. Disconnect the DPT or APT and connect an SLT. * The dialing mode (tone or pulse) being incorrect. Set the Tone/Pulse switch to the other position.
Why can't I make calls on my Panasonic KX-TDA100 even when the CS isn't busy?
If the CS isn't busy but calls can't be made or received, the CSs might be located too close together in the same area. Reduce the number of CSs in the area, or increase the distance between them.
Why does the PS stay out of service after changing the CS status on Panasonic KX-TDA100?
It may take about 20 seconds for the CS to start up after the status has been changed to In Service. Wait until the CS starts up.
Why can't the maximum PS calls be made on a Panasonic KX-TDA100?
If the maximum number of PS calls can't be made, it might be due to a poor connection. Make sure that a 4-pair cable is used for the connection.
What to do if extensions don't work during power failure on Panasonic PBX?
If extensions connected to ports 1 to 4 of MSLC16/ SLC16 and ports 1 to 2 of DHLC8/SLC8 cards do not operate during a power failure, it could be due to a DPT or APT being connected to the extension port, or an incorrect dialling mode (tone or pulse). To resolve this, disconnect the DPT or APT and connect an SLT. Also, set the Tone/Pulse switch to the other position.
General| System Capacity | Up to 128 extensions |
|---|---|
| VoIP Support | Yes, with optional cards |
| Digital Extensions | Yes |
| Analog Extensions | Yes |
| ISDN Support | Yes |
| Power Supply | AC 100-240 V, 50/60 Hz |
| Operating Temperature | 0°C to 40°C |
| Humidity | 10% to 90% (non-condensing) |
| Networking | Yes |
| Type | Hybrid IP PBX |
| Wireless Capability | Yes |
| Supported Extensions | Digital, Analog |
| Trunk Interfaces | Analog, ISDN |
| Voicemail Capacity | Optional, via voice processing cards |
Guides on initial setup, telephone types, feature numbers, and icon descriptions.
Instructions for initiating various call types, including internal, external, and speed dialing.
Explains how to answer calls, manage call waiting, and receive notifications.
Details call transfer, hold, splitting, conferencing, muting, and monitoring.
Features for call forwarding, absent messages, and extension locking.
Configuration of timed reminders, DND, CLIP/CLIR, BGM, and data security.
Manages call distribution groups, agent status, and queue monitoring.
Call logs, directories, character entry, and system feature access for display phones.
Manager's control over extensions, time modes, and broadcast music.
Customizing PIN, display, call handling, and button assignments.
Manager functions for password changes and extension control.
System-wide configurations like date/time, speed dialing, and extensions.
Solutions for common telephone and system operational problems.
Reference list of features and their corresponding dial codes.
Descriptions and waveforms of audible system tones.
Details changes made in different versions of the user manual.
To Next Page