Panasonic KX-TDA15

4.1 Connecting the PC
22 Getting Started
4.1 Connecting the PC
System programming of the Hybrid IP-PBX can be performed using PC software. The software for
the KX-TDA15 is shared by both the KX-TDA15 and KX-TDA30, and is referred to as "KX-TDA30
Maintenance Console". KX-TDA30 Maintenance Console's Quick Setup lets you easily configure the
Hybrid IP-PBX to receive intercom and trunk calls, as well as apply basic settings such as time and
date.
To programme the Hybrid IP-PBX, connect it to the PC with serial interface.
Serial Interface Connection
USB Port
RS-232C Port
PC
PC
To USB Port
To COM Port
RS-232C (Cross Cable)
Pin Assignments
Pin No.
2
3
4
5
6
7
8
Pin No.
2
3
4
5
6
7
8
COM PortRS-232C Port