Panasonic KX-TDA15

To disconnect one party and then talk to the other in a three-party conversation
PT/PS
Press TRANSFER once
or twice to establish a
conversation with the
party to be disconnected.
During a conversation
Press FLASH/RECALL.*
Press the flashing CO,
ICD Group or INTERCOM
corresponding to the party
on hold.
Talk.
The other party will be put on hold.
TRANSFER
FLASH/
RECALL
OR
(CO)
INTERCOM
OR
(ICD Group)
• * In this case, the FLASH/RECALL button on a proprietary telephone must be set to Flash/
Recall mode through system programming.
• During a three-party conversation, pressing the TRANSFER button or Recall/hookswitch al-
ternates between the other parties in the conversation.
• You can have a conference with a maximum of eight parties (comprising intercom or outside
lines) simultaneously.
• During a conversation involving four or more parties, you cannot disconnect one party and
maintain the conversation with the other parties.
Customising Your Phone
• 3.1.3 Customising the Buttons
Create or edit a Conference button.
Leaving a Conference (Unattended Conference)
The person who originated a conference can leave the conference, and allow the other
parties to continue the conversation.
To leave a conference
PT/PS
Press CONF.
During 3- to 7-party conference
CONF
On-hook.
User Manual 77
1.4.5 Multiple Party Conversation