Yes—Only
One-touch
dialling
buttons can be modified. Howev-
er, to modify them, there is no
need
to enter "2" before the num-
ber.
*1
Not available for a PS
*2
Only available for KX-T7633/KX-T7636/IP-PTs (except KX-NT265/KX-NT321)/KX-DT343/KX-DT346 telephones.
*3
CO button numbers (25–36) are available only when the Add-on Key Module is set up to your telephone.
*4
Not available for the KX-T7665
*5
This
setting applies to both outside and intercom calls. For intercom calls, this feature must be enabled through system programming.
*6
Only available for certain digital proprietary telephones.
*7
Only available for KX-NT300 series (except KX-NT321)/KX-DT343/KX-DT346 telephones.
*8
Registering and cancelling a Bluetooth wireless headset may take time. Please avoid any interruption during that time by, for example,
going off-hook.
CAUTION
There is a
risk that fraudulent telephone calls will be made if a third party discovers your pass-
word (extension PIN).
The cost of such calls will be billed to the owner/renter of the PBX.
To protect the PBX from this kind of fraudulent use, we strongly recommend:
a. Keeping your PIN secret.
b. Selecting a complex, random PIN that cannot be easily guessed.
c. Changing your PIN regularly.
• After the programme number is entered, the programme title is displayed.
The programming screen can be changed with the Navigator Key (Up or Down).
• You can select the parameter with the Navigator Key (Up or Down) instead of entering a num-
ber.
200 User Manual
3.1.2 Settings on the Programming Mode
To Next Page
Loading...
