EasyManua.ls Logo

Panasonic KX-TDA50G

Panasonic KX-TDA50G
378 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Directory Type Description Programming
PS Dialing Directory A list of names and telephone numbers. Used to make
a call to one of the stored parties.
Stored in the PS by the
PS user.
Quick Dialing A list of frequently dialed feature numbers as well as
names and telephone numbers. Used to quickly
access one of the stored features, or quickly make a
call to one of the stored parties.
Stored in the PS by the
PS user.
System Speed Dialing
Directory
A system-wide list of names and telephone numbers.
Used to make a call to one of the stored parties.
Stored in the PBX.
PBX Extension Dialing
Directory
A system-wide list of extension names. Used to make
a call to one of the stored extensions.
Stored in the PBX.
PC Programming Manual References
8.1 [6-1] System Speed Dial
Name
CO Line Access Number + Telephone Number
6.1 [4-1-1] Wired Extension—Extension Settings
—Main—
Extension Name
6.10 [4-2-1] Portable Station—Extension Settings
—Main—
Extension Name
PT Programming Manual References
[001] System Speed Dialing Number
[002] System Speed Dialing Name
[004] Extension Name
13.1.26 PS Feature Buttons
Description
Although
a portable station (PS) does not feature as many buttons as a proprietary telephone (PT), a PS can
be customized to give a PS user access to PBX features, just as the flexible buttons on a PT can be customized.
(® 6.1.3 Flexible Buttons)
13.1.27 PS Ring Group
Description
A PS ring group is a way for several portable stations (PSs) to be notified of an incoming call simultaneously,
while using only one channel of a cell station (CS).
Normally when a PS receives a call, one channel of a CS is used to ring the PS (® 13.1.24 PS Connection).
If several PSs are members of an incoming call distribution (ICD) group, the available channels of a CS will
become busy just by ringing each PS. Assigning a group of PSs to a PS ring group alleviates this strain on the
CS because only one channel is needed to ring a PS ring group’s members.
PS ring group members and related parameters are assigned through system programming, as explained
below.
a. Floating Extension Number: When this number is called, all PSs in the group ring.
266 Feature Manual Document Version 2008-11
13.1.27 PS Ring Group

Table of Contents

Other manuals for Panasonic KX-TDA50G

Related product manuals