Panasonic KX-TDE100 - 1-1] Slot-Port Property - CSI;F Port-Connection Command

3.25 [1-1] Slot—Port Property - CSI/F Port—
Connection Command
Commands for the CSIF ports can be programmed.
INS
Puts the Cell Station (CS) in service.
Value Range
Not applicable.
Maintenance Console Location
3.25 [1-1] Slot—Port Property - CSI/F Port—Connection Command
Programming Manual References
3.24 [1-1] Slot—Port Property - CSI/F Port
Feature Guide References
None
OUS
Takes the CS out of service. This enables a temporary non-use of the CS, for example, for the purpose of
repair.
Value Range
Not applicable.
Maintenance Console Location
3.25 [1-1] Slot—Port Property - CSI/F Port—Connection Command
Programming Manual References
3.24 [1-1] Slot—Port Property - CSI/F Port
Feature Guide References
None
222 PC Programming Manual
3.25 [1-1] Slot—Port Property - CSI/F Port—Connection Command