To Next PageTo Next Page
How to fix Panasonic KX-TDE200 PBX when One-touch Dialing isn't working for outside calls?
If you are unable to make an outside call using the One-touch Dialing button or speed dialing on your Panasonic PBX, it may be because a line access number was not stored. A line access number is required for outside calls.
What to do if Panasonic PBX telephone does not respond?
If your Panasonic PBX telephone isn't responding when you press the buttons, it could be because the telephone is locked. Try unlocking your telephone. Another reason might be that your telephone is connected to an eXtra Device Port, which requires system programming. In this case, consult your dealer.
How to fix IP-PT cannot connect to Panasonic KX-TDE200 PBX?
If the IP-PT cannot connect to the Panasonic PBX, consider the following: * Incorrect IP address, subnet mask address, PBX IP address, or default gateway address: Check each parameter and enter the correct value. * Ethernet cable not connected correctly: Check the Ethernet cable connections. * DHCP server is not active: Restart the DHCP server, or disable DHCP and re-enter settings.
Why is a reorder tone audible or "Restricted" displayed on Panasonic Telephone?
If you hear a reorder tone or see "Restricted" displayed on your Panasonic Telephone, it could be due to several reasons. The telephone might be locked, so try unlocking it. Alternatively, toll restriction could be activated, in which case you should consult your manager or dealer. Finally, an account code might be required.
Why can't I register a Bluetooth headset on Panasonic Telephone?
To register, de-register, or confirm the ID of the Bluetooth headset, make sure that the module is properly installed in the IP-PT/DPT.
How to troubleshoot Panasonic KX-TDE200 PBX Bluetooth headset?
To resolve issues with using a Bluetooth headset with your Panasonic PBX, first ensure that the headset is properly registered to the module. Next, ensure the headset is fully charged according to its manual. Finally, remove any wired headset from the headset jack, as priority is given to wired headsets when both are connected.
What to do if my Panasonic PBX phone buttons are not responding?
If your Panasonic PBX telephone does not respond when buttons are pressed, it could be because the telephone is locked. Unlock your telephone. It is also possible that your telephone is connected to an eXtra Device Port, and in this case system programming is required, so consult your dealer.
What to do if the Panasonic Telephone does not respond when buttons are pressed?
If your Panasonic Telephone isn't responding when you press the buttons, it might be locked. Try unlocking it. Another possibility is that your telephone is connected to an eXtra Device Port, in which case system programming is required, and you should consult your dealer.
Why is my Panasonic KX-TDE200 PBX telephone not responding to button presses?
If your Panasonic PBX telephone does not respond when buttons are pressed, it might be locked. Unlock your telephone. Alternatively, your telephone could be connected to an eXtra Device Port, which requires system programming. Please consult your dealer.
What to do if speakerphone is not audible on Panasonic PBX?
If you can't hear anything when using the speakerphone on an APT (Analogue Proprietary Telephone) with your Panasonic PBX, the HANDSET/ HEADSET selector might be set to the "HEADSET" position. When the headset is not used, set the HANDSET/HEADSET selector to the "HANDSET" position.
General| LED indicators | Yes |
|---|---|
| SIP extensions | 128 |
| Number of extensions | 256 |
| Number of DECT cell stations | 32 |
Weight and Dimensions| Weight | 15966.5 g |
|---|---|
| Dimensions (WxDxH) | 424 x 276 x 439 mm |
