How to fix Panasonic KX-TDE200 PBX parallelled telephones not ringing?
If the parallelled single line telephones for your Panasonic PBX aren't ringing, it's possible that "No ring" is selected. Change the setting to ring.
Why some Panasonic KX-TDE200 features do not work?
If some features on your Panasonic PBX aren't working, it could be because system management has restricted certain features; in this case, consult your manager. It's also possible that the feature numbers have changed, so confirm the revised number and try again.
How to troubleshoot Panasonic KX-TDE200 telephone?
If your Panasonic PBX telephone isn't working properly, first confirm with your manager that your settings are correct. If the problem continues, it's best to consult your dealer for further assistance.
Why did PC and fax communication fail with Panasonic KX-TDE200?
If the PC and fax machine communication failed with your Panasonic PBX, an indication tone may have interrupted communication.
What to do if Panasonic PBX telephone does not respond?
If your Panasonic PBX telephone isn't responding when you press the buttons, it could be because the telephone is locked. Try unlocking your telephone. Another reason might be that your telephone is connected to an eXtra Device Port, which requires system programming. In this case, consult your dealer.
What to do if Panasonic KX-TDE200 PBX redialling does not function?
Redialling does not function if the stored number was more than 32 digits or an extension number.
How do I fix 'Cannot register IP-PT' on my Panasonic KX-TDE200?
If you cannot register the IP-PT on your Panasonic PBX, it may be because the necessary network parameters are not set. If you are not using a DHCP server, set the IP address, subnet mask address, and enter the PBX IP address. If necessary, also enter the IP address of the default gateway. When using a DHCP server, enter the PBX IP address.
What does red ALARM indicator mean on Panasonic PBX?
If the ALARM indicator on the front of the shelf turns on red on your Panasonic PBX, a major system error has occurred in the PBX. See the error log using the Maintenance Console.
What to do if Panasonic PBX telephone does not work with personal settings?
If your Panasonic PBX telephone does not work using the personal settings or with other settings (One-touch dialling, forwarding destination, etc.), the extension line may have been changed. Clear the settings and then programme your desired settings again.
What to do if proprietary telephone operations do not work even after following the manual instructions on Panasonic KX-TDE200?
If none of the operations work when using a proprietary telephone on your Panasonic PBX, even after following the manual instructions, the Intercom line was not seized. If the setting has been changed, press the INTERCOM or PDN button after going off-hook and follow the instructions. Alternatively, the seized line, when going off-hook, may have been changed by personal setting.
General| LED indicators | Yes |
|---|---|
| SIP extensions | 128 |
| Number of extensions | 256 |
| Number of DECT cell stations | 32 |
Weight and Dimensions| Weight | 15966.5 g |
|---|---|
| Dimensions (WxDxH) | 424 x 276 x 439 mm |
To Next Page
