Why is the MESSAGE button light lit on Panasonic Telephone?
The MESSAGE button light is lit because another extension left you a message waiting indication while you were on the phone or away from your desk.
Why doesn't an SDN button work on my Panasonic extension?
If an SDN button on your extension does not work, a PDN button is not assigned on the extension corresponding to your SDN button. Create a PDN button on the desired extension.
What to do if Panasonic KX-TDE200 operations don't work with a proprietary telephone?
If your Panasonic PBX proprietary telephone operations are not working even when following the manual, it could be because the Intercom line was not seized. To resolve this, press the INTERCOM or PDN button after going off-hook and follow the instructions. Alternatively, the seized line may have been changed by personal setting. Going off-hook means an Intercom line is seized.
Why is my Panasonic KX-TDE200 PBX telephone not responding to button presses?
If your Panasonic PBX telephone does not respond when buttons are pressed, it might be locked. Unlock your telephone. Alternatively, your telephone could be connected to an eXtra Device Port, which requires system programming. Please consult your dealer.
How to fix Panasonic KX-TDE200 PBX when One-touch Dialing isn't working for outside calls?
If you are unable to make an outside call using the One-touch Dialing button or speed dialing on your Panasonic PBX, it may be because a line access number was not stored. A line access number is required for outside calls.
What does it mean when Panasonic PBX displays 'Restricted' or gives a reorder tone?
If you are hearing a reorder tone or seeing "Restricted" displayed on your Panasonic PBX, it could be because the telephone is locked. Unlock your telephone. It's also possible that toll restriction is activated, in which case you should consult your manager or dealer. An account code may also be required.
Why are paralleled single line telephones not ringing on my Panasonic KX-TDE200?
If the paralleled single line telephones do not ring on your Panasonic PBX, it may be because "No ring" is selected. Change the setting to ring.
How to troubleshoot Bluetooth headset issues with Panasonic KX-TDE200 PBX?
If you cannot have a conversation using the Bluetooth headset with your Panasonic PBX, make sure that the headset is properly registered to the module. Also, ensure that the headset is properly charged according to the headset's manual. Finally, remove the wired headset from the headset jack, as priority is given to the wired headset when both are connected.
Why can't I register my Bluetooth headset with Panasonic KX-TDE200?
If you cannot register, de-register, or confirm the ID of the Bluetooth headset on your Panasonic PBX, make sure that the module is properly installed in the IP-PT/DPT.
Why is redialing not working on my Panasonic KX-TDE200 PBX?
If redialing does not function on your Panasonic PBX, the stored number may have been more than 32 digits or an extension number.
General| LED indicators | Yes |
|---|---|
| SIP extensions | 128 |
| Number of extensions | 256 |
| Number of DECT cell stations | 32 |
Weight and Dimensions| Weight | 15966.5 g |
|---|---|
| Dimensions (WxDxH) | 424 x 276 x 439 mm |
To Next Page
