To Next PageTo Next Page
What does it mean when the ALARM indicator is red on my Panasonic KX-TDE200?
If the ALARM indicator on the front of the shelf turns on red on your Panasonic PBX, it indicates a major system error. To troubleshoot this, see the error log using the KX-TDE Maintenance Console.
How do I fix 'Cannot register IP-PT' on my Panasonic KX-TDE200?
If you cannot register the IP-PT on your Panasonic PBX, it may be because the necessary network parameters are not set. If you are not using a DHCP server, set the IP address, subnet mask address, and enter the PBX IP address. If necessary, also enter the IP address of the default gateway. When using a DHCP server, enter the PBX IP address.
What to do if my Panasonic PBX is not working correctly?
To address a Panasonic PBX that is not operating properly, press the Reset Button. Turn off the power switch, and then turn it back on. Turn off the power switch, and then unplug the PBX. After 5 minutes, plug the PBX back in, and turn the power switch back on.
Why does my Panasonic KX-TDE200 PS keep going out of range?
If the PS becomes out of range and you cannot make calls using the PS on your Panasonic PBX, the CSIF card might not be working, or the CS might not be working, the location of CS might not be good, or the access system of the PS might not be properly set. Properly install the CSIF card. Make sure that the cable is connected properly with correct pin assignments, and ensure that the cable does not make short circuits, and switch all DIP switches off. Locate the CS properly. Change the access system setting of the PS to the appropriate system or automatic.
Why is there noise or disconnections when using the PS on my Panasonic PBX?
If you experience frequent noise or disconnections while using the PS on your Panasonic PBX, it may be due to call handover not working or the PS being out of the CS coverage area. Locate the CS properly.
How do I resolve issues setting IP addresses on my Panasonic KX-TDE200 PBX IP-PT?
If you cannot set the IP address, subnet mask address, and PBX IP address to the IP-PT on your Panasonic PBX, it means that an unusable value is being set. Set an IP address within the valid range. IP address of the IP-PT/PBX should be from '1.0.0.0' to '223.255.255.255', and the subnet mask address should be from '1.0.0.0' to '255.255.255.254'.
What to do if I can't register the PS on my Panasonic KX-TDE200?
If you cannot register the PS on your Panasonic PBX, it may be due to a wrong Personal Identification Number (PIN) registered to the PS, or the CS is not connected properly. Enter the PIN set to the PBX into the PS. Make sure that the cable is connected properly with correct pin assignments. Also, make sure that the cable does not make short circuits. Switch all DIP switches off.
How to eliminate noise on external paging on my Panasonic KX-TDE200 PBX?
If you are experiencing noise on external paging with your Panasonic PBX, it is likely due to induced noise on the wire between the PBX and the amplifier. Using a shielded cable as the connection wire between the PBX and amplifier is recommended. A short shielded cable is preferable.
Why can't I make outside calls, transfer calls, or conference on my Panasonic KX-TDE200 PBX?
If originating an outside call, call transfer, or conference cannot be performed on your Panasonic PBX, it means that the corresponding flexible button does not exist on the PT. Programme the flexible button.
Why is the external music distorted on my Panasonic KX-TDE200 PBX?
If you are experiencing distorted external music on your Panasonic PBX, it is likely due to an excessive input level from the external music source. Decrease the output level of the external music source by using the volume control on the music source.
General| LED indicators | Yes |
|---|---|
| SIP extensions | 128 |
| Number of extensions | 256 |
| Number of DECT cell stations | 32 |
Weight and Dimensions| Weight | 15966.5 g |
|---|---|
| Dimensions (WxDxH) | 424 x 276 x 439 mm |
PBX supports IP communication using various IP telephones, Softphones, and SIP Extensions.
PBX features Navigator Key/Jog Dial and display for easy access, and informs of calls/messages via lamp.
PBX supports using cellular phones to make and receive calls as registered extensions.
PBX optionally supports a Portable Station (PS) system for wireless use with wired telephones.
PBX allows callers to leave voice messages when unable to answer.
PBX has a Call Centre feature for Incoming Call Distribution (ICD) Group, queuing, and monitoring.
CA Client users can connect to PBX for phonebook dialing, calls, and other features.
Application calculates call cost estimates and tracks call activity. Web server software for access.
Basic information and types of telephones used with the PBX.
Covers fundamental call procedures like intercom, outside calls, private networks, and account codes.
Methods for answering incoming calls using various buttons or the handset.
Procedures and features for managing calls while in a conversation.
Explains the function and usage of PDN and SDN buttons for call handling.
Procedures for forwarding calls and setting other features before leaving your desk.
Procedures for making and answering voice announcements and conference calls.
Allows customization of telephone features like alarms, DND, and call waiting.
Provides functions for managing incoming call distribution groups and monitoring calls.
Instructions for connecting and using external equipment like doorphones or relays.
Features for hotel-type environments like check-in, check-out, and wake-up calls.
Allows users to exchange personal settings between extensions for mobility.
Features specific to display telephones, including call logs and directories.
Information on using IP proprietary telephones, specifically self-labelling features.
Lists PBX features accessible by KX-HGT100 SIP extension users.
Features available when using cellular phones with the PBX for call handling.
Manager functions for controlling other extensions and system settings.
How managers can control settings of other extensions, like locking/unlocking.
How managers change time modes (Day, Night, Lunch, Break) for the system.
How managers adjust call restriction levels for extensions to permit calls.
How managers select and broadcast background music via external speakers.
How managers record greeting messages (DISA, ICD Group, Timed Reminder).
How managers manually enable unavailable outside lines for users.
How to stop monitoring extensions connected to other PBXs.
Allows users to customize telephone features and button settings.
How to customize telephone features like PIN assignment and button settings.
How to configure various PBX features, display settings, and line assignments.
Guides on customizing flexible and programmable feature buttons for various functions.
Enables managers to program call charges and control other extensions.
How to customize system settings like date/time, speed dialling, and extensions.
Lists common problems and their remedies for telephone operation and features.
Lists default feature numbers and additional digits/buttons for PBX operations.
Explains various ring, dial, and indication tones, and their meanings.
