• Some PC LAN cards allow VLAN settings to be assigned. However, when using a PC connected to an
IP telephone with 2 ports, the VLAN settings for PC communications must be assigned only to the
secondary port of the IP telephone. Any VLAN settings assigned to the PC LAN card must be disabled.
These settings can usually be identified by "802.1Q", "802.1p", or "VLAN" in their name.
• If you are using an IP telephone with a primary port only (e.g., KX-NT265
*1
), a PC cannot be connected
to the IP telephone.
*1
Only KX-NT265 IP-PTs with a software version of 2.00 or later are supported by KX-NCP500/KX-NCP1000.
Document Version 2010-08 IP Networking Guide 9
1.2.2 VLAN (Virtual LAN)
To Next Page
Loading...
