Panasonic KX-TG1283BXS

15.2. Power Supply Circuit
The power is supplied to the DECT BBIC, RF Module, EEPROM and Charge Contact from AC Adaptor (+6V) as shown in
Fig.101. The power supply is as follows;
•
• •
• DECT BBIC (IC4):
CN1 (+6V) → D1 → IC1 → Q2 → IC4 (3.0V)
CN1 (+6V) → D1 → IC1 → Q3 → IC4 (1.8V)
•
• •
• RF Module (IC2):
CN1 (+6V) → D1 → IC11 → IC2 (2.5V)
•
• •
• EEPROM (IC3):
CN1 (+6V) → D1 → IC1 → Q2 → IC3 (3.0V)
•
• •
• FLASH MEMORY (IC8):
CN1 (+6V) → D1 → IC1 → Q2 → IC8 (3.0V)
•
• •
• SP AMP (IC7):
CN1 (+6V) → D1 → IC1 → IC7 (4.0V)
•
• •
• TAM FLASH MEMORY (IC6):
CN1 (+6V) → D1 → IC1 → Q2 → IC6 (3.0V)
•
• •
• LOGIC IC (IC9, IC10):
CN1 (+6V) → D1 → IC1 → Q2 → IC9, IC10 (3.0V)
•
• •
• Charge Contact (TP15):
CN1 (+6V) → D1 → R2, R4 → TP15
<Fig.101>
49
KX-TG1283BXS / KX-TG1283BXT / KX-TCA122CXS / KX-TCA122CXT / KX-TCA121CXS / KX-TCA121CXT