When you use the landline again
Before connecting the telephone line to the base
unit, select “Off” in step 2, “Cellular line only
mode (If you do not use the landline)”, page 18.
Cellular line selection
This feature determines which cellular line is
selected to make cellular calls when:
– you press MCELLN on the handset.
– you press M
N or MZN on the handset while the
cellular line only mode is turned on.
– you lift the corded handset or press MZN on the
base unit while the cellular line only mode is
turned on.
The following settings are available:
– “Manual” (handset only: default): You can
select the desired cellular line when making a
call.
– “Cellphone 1”
*1
(base unit default): CELL 1
is selected.
– “Cellphone 2”
*1
: CELL 2 is selected.
Handset / Base unit
1 MMENUN#634
2 MbN: Select the desired setting. a MSAVEN
3 Proceed with the operation for your unit.
Handset: MOFFN
Base unit: MEXITN
*1 After the Bluetooth device is paired, the device
name is displayed.
Storing your area code (for dialing
only a 7-digit phone number to make
a local call)
You need to add your area code when making
cellular calls to a phone number in your area.
Once you store your area code, it is automatically
added to the beginning of the 7-digit phone
number when making cellular calls.
You can configure this setting using either the
base unit or one of the handsets.
Handset / Base unit
1 MMENUN#633
2 Enter the 3-digit area code.
R To correct a digit, press MCLEARN.
3 MSAVEN
4 Proceed with the operation for your unit.
Handset: MOFFN
Base unit: MEXITN
Changing the Bluetooth PIN
(Personal Identification Number)
The PIN is used to pair cellular phones to the base
unit. The default PIN is “0000”. To prevent
unauthorized access to this product, we
recommend that you change the PIN, and keep it
confidential.
You can configure this setting using either the
base unit or one of the handsets.
Important:
R Please make note of your new PIN. The unit
does not reveal the PIN to you. If you forget
your PIN, see page 74.
Handset / Base unit
1 MMENUN#619
R If the unit prompts you to enter the old PIN
(when the default has been changed), enter
the current 4-digit PIN.
2 Enter the new 4-digit PIN. a MOKN
3 Enter the new 4-digit PIN again. a MSAVEN
4 Proceed with the operation for your unit.
Handset: MOFFN
Base unit: MEXITN
For assistance, visit www.panasonic.ca/english/support
19
Link to Cell
To Next Page
Loading...
