Intercom Features
27
Handset locator
You can locate a misplaced handset by
paging it from the base unit.
For KX-TG2421AL users
1 Base unit:
Press {HANDSET LOCATOR} to page
the handset.
L The IN USE indicator will flash
rapidly.
L The handset will beep for 1minute.
2 Base unit:
To stop paging, press {HANDSET
LOCATOR}.
OR
Handset:
To stop paging, press {OFF}.
For KX-TG2422AL users
1 Base unit:
Press {HANDSET LOCATOR1} or
{HANDSET LOCATOR2} to page the
handset.
L The IN USE indicator will flash
rapidly.
L The handset will beep for 1minute.
2 Base unit:
To stop paging, press {HANDSET
LOCATOR1}, or {HANDSET
LOCATOR2}.
OR
Handset:
To stop paging, press {OFF}.
Intercom (KX-TG2422AL
only)
Intercom calls can be made between 2
handsets.
Note:
L If you have difficulty hearing the other
party while using the speaker, decrease
the speaker volume.
L If you receive a phone call while talking
on the intercom, you will hear 2 tones
(page 31). To answer the call, press
{OFF}, then press {C} or {s}.
L You cannot change the ringer tone for
intercom calls.
Example: When handset 1 calls handset 2.
1 Handset 1:
Press {INTERCOM}.
L The paged handset will beep for 1
minute.
L To stop paging, press {OFF}.
2 Handset 2:
Press {C}, {s}, or {INTERCOM} to
answer.
3 When finished talking, press {OFF} or
place the handset on the base unit or
charger.
TG2421AL_2422AL(e).book Page 27 Tuesday, March 15, 2005 6:29 PM
To Next Page
Loading...
