Programmable Settings
29
Guide to handset programming
For your reference, a chart of all programmable functions is printed below. Details for each
item can be found on the corresponding pages. To programme, press {MENU}, press {V}
or {^} to scroll through the menu, and press {>} or {Select} when the desired menu item
or setting is displayed.
Important:
L Before programming, make sure the handset and base unit are not being used. The
handset must be operated near the base unit and while off the base unit or charger.
*1 KX-TG2422AL only
*2 If you programme these settings using one of the handsets, you will not need to
programme the same item using the other handset (KX-TG2422AL only).
Note:
L To exit programming, press {OFF} at any time.
L To go back to the previous menu, press {<} or {Back}, or press {>} or {Select} while
“(Go back)” is displayed.
Main menu Sub-menu 1 Sub-menu 2 Page
Ringer setting Ringer volume – page 30
Ringer tone – page 30
Interrupt tone
*1
– page 31
Voice enhancer – – page 31
Dial lock
*2
– – page 33
Copy phonebook
*1
Copy 1 item – page 22
Copy all items – page 23
Initial setting LCD contrast – page 32
Key tone – page 34
Auto talk – page 31
Set area code – page 33
Set tel line Set dial mode
*2
page 42
Set recall time
*2
page 32
Set line mode
*2
page 32
Registration – page 34
TG2421AL_2422AL(e).book Page 29 Tuesday, March 15, 2005 6:29 PM
To Next Page
Loading...
