Useful Information
39
Wall mount template for the charger
25.4 mm
Charger (KX-TG2422AL only)
The charger can be wall mounted, as shown below.
1 Connect the AC adaptor.
2 Drive the screws (not included) into the wall using the wall mount template (see below).
3 Mount the charger (1).
4 Slide it down (2) and to the right (3) until it is secure.
1
2
3
25.4 mm
Screws
To power
outlet
TG2421AL_2422AL(e).book Page 39 Tuesday, March 15, 2005 6:29 PM
To Next Page
Loading...
