Programmable Settings
36
Note:
L If the unit is connected via a PBX, certain
PBX functions (call transferring, etc.)
may not work correctly. Consult your
PBX supplier for the correct setting.
Line mode
The line mode is preset to “B” and
generally should not be adjusted. If “Line
in use” on the handset is not displayed
properly, the line mode selection is
incorrect. Set line mode to “A”.
1 Press {MENU}.
2 Scroll to “Initial setting” by
pressing {V} or {^}, then press {>}.
3 Scroll to “Set tel line” by pressing
{V} or {^}, then press {>}.
4 Scroll to “Set line mode” by pressing
{V} or {^}, then press {>}.
5 Press {V} or {^} repeatedly to select
the desired setting.
6 Press {Save}, then press {OFF}.
Other options
Dial lock
This feature prohibits making outside calls.
The default setting is OFF.
Important:
L When dial lock is turned on, only
phone numbers stored in the
phonebook as emergency numbers
(numbers stored with a # at the
beginning of the name) can be dialed
using the phonebook (page 22). We
recommend storing emergency
numbers in the phonebook before
using this feature.
L When dial lock is turned on, you cannot
store, edit, or erase items in the
phonebook.
To turn dial lock on
1 Press {MENU}.
2 Scroll to “Dial lock” by pressing {V}
or {^}, then press {>}.
3 Enter a 4-digit password.
L This password is required when
turning dial lock off. We recommend
writing the password down.
4 Press {Save}.
5 Press {Yes}.
L “Dial lock on” will be displayed.
6 Press {OFF}.
Note:
L If dial lock is turned on, the handset
displays “Dial lock”. While there are
missed calls, “Dial lock” is not
displayed when the handset is off the
base unit or charger.
TG2433BX_2434BX(e).book Page 36 Thursday, March 31, 2005 10:57 AM
To Next Page
Loading...
