Useful Information
50
Wall mounting
Base unit
The base unit can be mounted on a wall.
1 Connect the AC adaptor and the telephone line cord.
2 Drive the screws (not included) into the wall using the wall mount template (see below).
Connect the telephone line cord. Mount the unit, then slide it down.
L Raise the antenna.
To power
outlet
Fasten the AC adaptor cord.
Hooks
To single-line
telephone jack
Screws
82 mm
Wall mount template for the base unit
82 mm
TG2433BX_2434BX(e).book Page 50 Thursday, March 31, 2005 10:57 AM
To Next Page
Loading...
