Panasonic KX-TG2511FX - Getting Started; Initial Setup and Connections; Battery Installation and Charging

Getting Started
10
Setting up
Connections
L Use only the supplied Panasonic AC
adaptor PQLV219CE.
■ Base unit
*DSL/ADSL filter (not supplied) is
required if you have DSL/ADSL service.
■ Charger
Battery installation
L USE ONLY Ni-MH batteries AAA
(R03) size.
L Do NOT use Alkaline/Manganese/Ni-
Cd batteries.
L Confirm correct polarities (S, T).
Battery charge
Charge for about 7 hours.
L When the batteries are fully charged,
“Fully charged” is displayed.
(220-240 V AC,
50/60 Hz)
“Click”
Press plug firmly.
Use only the supplied
telephone line cord.
Hook
Correct Wrong
To telephone
line
DSL/ADSL filter*
“Click”
(220-240 V AC,
50/60 Hz)
Hooks
L When the language selection is
displayed, see page 13.
Rechargeable Ni-MH ONLY
Confirm “Charging”
is displayed.
TG2511_21FX(e).book Page 10 Tuesday, February 2, 2010 3:08 PM