Panasonic KX-TG2511FX - Special Programming Options

Programming
22
Special programming
Changing the unit’s region
setting/Resetting the base
unit
1
{j/OK}
2 {V}/{^}: “Base Unit Setup” i
{j/OK}
3 {V}/{^}: “Country” i {j/OK}
4 {V}/{^}: Select the desired country.
i {j/OK}
5 {V}/{^}: “Yes” i {j/OK} i
{ic}
Note:
L The following items will be deleted or
reset to their default settings:
– Base unit settings (page 20)
– Answering system settings
(KX-TG2521, page 19)
– One touch eco mode (page 14)
– Caller list
– Voice mail messages
L The following items will be retained:
– Date and time
– Repeater mode
– Recordings, including your greeting
message and caller messages
(KX-TG2521)
– Call screening (KX-TG2521)
L If you select the desired country in
step 4, the following default settings
will be changed for the selected
country’s default settings:
– Recall/flash time (page 20)
– Display language (page 20)
L According to your country selection in
step 4, the answering system
announcement language changes as
follows (KX-TG2521):
L After changing the unit’s region
setting/resetting the base unit, w
flashes on the handset momentarily.
This is normal and the handset can be
used once w stops flashing.
Increasing the range of the
base unit
You can increase the signal range of the
base unit by using a DECT repeater.
Please use only the Panasonic DECT
repeater noted on page 4. Contact your
Panasonic dealer for details.
Important:
L Before registering the repeater to this
base unit, you must turn the repeater
mode on.
L Do not use more than one repeater at
a time.
Setting the repeater mode
1 {j /OK}
2 {V}/{^}: “Base Unit Setup” i
{j/OK}
3 {V}/{^}: “Repeater Mode” i
{j/OK}
4 {V}/{^}: Select the desired setting.
i {j/OK} i {ic}
Note:
L After turning the repeater mode on or
off, w flashes on the handset
momentarily. This is normal and the
handset can be used once w stops
flashing.
Czech
Slovakia
countries
except Czech and Slovakia
Czech
Slovak
-
-
English
-
TG2511_21FX(e).book Page 22 Tuesday, February 2, 2010 3:08 PM