Programming
21
*6 The default display language will be as follows if you select the following regional
codes when changing the unit’s region setting (page 13):
*7 Turn this feature off if you prefer not to hear key tones while you are dialling or
pressing any keys, including confirmation tones and error tones.
*8 If you subscribe to a Caller ID service and want to view the caller’s information
after lifting up the handset to answer a call, turn off this feature.
*9 The recall/flash time depends on your telephone exchange or host PBX. Contact
your PBX supplier if necessary.
*10The default setting will be as follows if you select the following regional codes
when changing the unit’s region setting (page 22):
*11To prevent other users from joining your conversations with outside callers, turn
this feature on.
TG2511_21FX(e).book Page 21 Tuesday, February 2, 2010 3:08 PM
To Next Page
Loading...
