To Next PageTo Next PageWhy is my Panasonic KX-TG2631 Answering Machine not recording messages?
If your Panasonic Answering Machine does not record new messages, the recording time may be set to “Greeting only”. Select a different setting. The message memory may be full, erase unnecessary messages. If you subscribe to the Voice Mail service, messages are recorded by the telephone company not your telephone.
Why I cannot program items on my Panasonic KX-TG2631?
If you cannot program items on your Panasonic Answering Machine, it may be because another user is listening to messages or the answering system is answering a call. Try again later.
How to eliminate static on Panasonic KX-TG2631 Answering Machine?
If you are experiencing static or the sound cuts in and out on your Panasonic Answering Machine, it could be due to interference from other electrical units. Try moving the handset and base unit away from other appliances. You can also try moving closer to the base unit, raising the base unit antenna, or turning on the clarity booster feature. If you have DSL service, consider connecting a noise filter between the base unit and the telephone line jack.
Why I cannot hear a dial tone on my Panasonic Answering Machine?
If you cannot hear a dial tone on your Panasonic Answering Machine, confirm that the telephone line cord is properly connected. If it is connected properly, disconnect the unit and connect a working telephone. If the working telephone operates properly, contact service personnel to have the unit repaired. If the working telephone does not operate properly, contact your telephone company.
How to fix a Panasonic KX-TG2631 Answering Machine that does not work?
If your Panasonic Answering Machine isn't working, there could be several reasons: * Ensure the battery is correctly installed and fully charged. * Check all connections to make sure they are secure. * Try resetting the unit by unplugging the AC adapter, then reconnecting it. * The handset may need to be registered to the base unit.
Why is the message indicator flashing on my Panasonic KX-TG2631 Answering Machine?
If the message indicator on your Panasonic Answering Machine handset is flashing, it means new messages have been recorded. To stop the flashing, listen to the new messages.
Why can't I access my Panasonic KX-TG2631 Answering Machine messages remotely?
If you cannot listen to messages from a remote location on your Panasonic Answering Machine, a touch tone phone is required for remote operation. Ensure you enter the remote code correctly and that the answering system is turned on.
How to turn on ringer on Panasonic KX-TG2631?
If your Panasonic Answering Machine handset does not ring, the ringer volume may be turned off. Adjust the ringer volume.
Why I cannot make a call on my Panasonic Answering Machine?
If you cannot make a call on your Panasonic Answering Machine, the dialing mode may be set incorrectly, change the setting. It is also possible that the base unit or another handset is in use, try again later.
What to do if Panasonic Answering Machine handset display is blank?
If the handset display on your Panasonic Answering Machine is blank, make sure that the battery is properly installed and fully charged.
General| Type | Cordless Phone |
|---|---|
| Number of Handsets | 1 |
| Answering Machine Recording Time | 18 minutes |
| Caller ID | Yes |
| Talk Time | Up to 5 hours |
| Standby Time | Up to 11 days |
| Speakerphone | Yes |
| Phone Lines | 1 |
| Handsets Supported | 1 |
| Call Waiting Caller ID | Yes |
| Digital Answering System | Yes |
| Backlit Display | Yes |
| Intercom | Yes |
| Phonebook Capacity | 50 names & numbers |
| Range | Up to 1000 feet |
Critical safety precautions for product use to reduce risk of fire, shock, or injury.
Connecting the base unit to the AC adaptor and telephone line cord.
Connecting the charger and installing/charging the handset battery.
Procedures for making calls, redialing, and using special features.
How to answer incoming calls and use call features like Auto Talk.
Using Caller ID features and understanding call information.
Customizing ringtones, volume, and other unit functions via menus or codes.
Turning the system on/off, recording greetings, screening calls.
Identifying and resolving unit problems through error messages and FAQs.
