Programming
21
Helpline Tel. No.: U.K. 0844 844 3898 R.O.I. 01289 8333
Programmable settings
You can customise the unit by programming the following features using the handset.
To access the features, there are 2 methods:
– scrolling through the display menus (page 21)
– using the direct commands (page 23)
L Direct command is the main method used in these operating instructions.
Programming by scrolling through the display menus
1
8
2 Press {V} or {^} to select the desired main menu. i M
3 Press {V} or {^} to select the desired item in sub-menu 1. i M
L In some cases, you may need to select from sub-menu 2. i M
4 Press {V} or {^} to select the desired setting. i M
L This step may vary depending on the feature being programmed.
L To exit the operation, press {ic}.
Note:
L See page 23 for the default settings.
Main menu Sub-menu 1 Sub-menu 2 Page
Caller List
\
––29
Answer System
e
Play New Msg. –33
Play All Msg. –33
Erase All Msg.
*1
–34
Greeting Start REC
*1
32
Play Greeting 32
Default
*1
32
Settings Number of Rings
*1
35
Recording Time
*1
36
Remote Code
*1
34
Call Screening 31
Answer On
*1
–31
Answer Off
*1
–31
Time Settings
e
Set Date/Time
*1
–14
Alarm –26
Time Adjustment
*1
––
Intercom
4
––38
TG5521E(e).book Page 21 Tuesday, March 16, 2010 7:47 AM
To Next Page
Loading...
