To Next PageTo Next PageWhy does my Panasonic Answering Machine not announce caller names correctly?
Name pronunciation may vary on your Panasonic Answering Machine. This feature may not pronounce all names correctly. The handset or base unit will announce each letter of abbreviations, such as “Co.” and “Inc.”. Caller ID supports a name of up to 15 letters. If the caller’s name has more than 15 letters, the name will not be announced correctly.
What to do if my Panasonic KX-TG5571M does not work?
If your Panasonic Answering Machine isn't working, make sure the battery is correctly installed, check all connections, fully charge the battery, and clean the charging contacts before recharging. Try resetting the unit by unplugging the AC adapter and plugging it back in. Also, ensure the handset is registered to the base unit, or try reinstalling the battery and fully charging it again.
Why does my Panasonic KX-TG5571M display “Recharge battery”?
If your Panasonic Answering Machine displays “Recharge battery” or beeps intermittently, the battery likely needs to be fully charged.
What does it mean when my Panasonic KX-TG5571M Answering Machine displays “No link to base”?
If your Panasonic Answering Machine displays “No link to base. Move closer to base, try again.” and sounds an alarm, it means the handset has lost communication with the base unit. Try moving closer to the base unit. Also, confirm that the base unit’s AC adapter is plugged in and raise the base unit antennas. The handset’s registration may have been canceled, consider re-registering the handset.
Why can't I make long distance calls on my Panasonic KX-TG5571M?
If you cannot make long distance calls on your Panasonic Answering Machine, make sure that you have long distance service.
Why can't I operate the answering system on my Panasonic Answering Machine?
If you cannot operate the answering system on your Panasonic Answering Machine, someone else may be operating it. If someone is on a conference call, you cannot operate the answering system; try again later.
Why does my Panasonic Answering Machine say 'Recharge battery' after charging?
If your Panasonic Answering Machine still displays “Recharge battery” after fully charging, clean the charge contacts and charge again. The battery may need to be replaced. If you install a new battery, fully charge it.
What does it mean when 'E' flashes on my Panasonic KX-TG5571M Answering Machine?
If 'E' flashes and the ANSWER ON indicator flashes rapidly on your Panasonic Answering Machine, and no new messages are recorded, the message memory is full. Erase unnecessary messages.
Why won't my Panasonic KX-TG5571M Answering Machine display caller ID?
If your Panasonic Answering Machine handset does not display the caller’s name or phone number, you may not have subscribed to Caller ID service, so contact your telephone company to subscribe. Also, if your unit is connected to any additional telephone equipment, disconnect the unit from the equipment and plug it directly into the wall jack.
Why does my Panasonic KX-TG5571M Answering Machine display “Charge for 6 HRS”?
If your Panasonic Answering Machine displays “Charge for 6 HRS” and the handset does not work, the battery has been discharged. Fully charge the battery.
General| Brand | Panasonic |
|---|---|
| Model | KX-TG5571M |
| Answering System | Digital |
| Maximum Recording Time | 18 minutes |
| Number of Handsets | 1 |
| Handsets Supported | 6 |
| Frequency | 1.9 GHz |
| Caller ID | Yes |
| Call Waiting Caller ID | Yes |
| Speakerphone | Yes |
| Display | LCD |
| Backlit Display | Yes |
| Battery Type | Ni-MH |
| Talk Time | Up to 10 hours |
| DECT Technology | Yes |
| Intercom | Yes |
| Range | Up to 1000 feet |
| Type | Answering Machine |
| Phonebook Capacity | 50 |
Provides critical safety precautions for using the telephone unit.
Details how to connect the base unit to power and the phone line.
Guides on how to install the battery in the handset.
Explains how to charge the battery and expected battery performance.
Instructs on replacing the handset battery when performance degrades.
Details how to make calls using the handset, including speakerphone.
Details how to make calls using the base unit speakerphone.
Details how to answer calls using the handset.
Guides on how to answer calls using the base unit speakerphone.
Step-by-step guide to adding new entries to the phonebook.
Guides on how to search and call contacts from the phonebook.
Introduces the base unit's speed dialer functionality.
Explains how to store numbers in the base unit speed dialer.
Explains the basic Caller ID service and its features.
Guides on viewing the caller list and returning missed calls.
Guides on saving caller list entries to the phonebook.
Introduces intercom calls between units and base.
Introduces call transfer functionality between units.
Guides on transferring calls from handset to base or other handsets.
Guides on transferring calls from the base unit to handsets.
Introduces the conference call feature.
Provides an overview of handset programming options and methods.
Explains how to register a new handset to the base unit.
Introduces the answering system and its basic functions.
Details how to activate or deactivate the answering system.
Guides on listening to messages via the base unit.
Guides on listening to messages via the handset.
Guides on recording a personal greeting message for the answering system.
Lists common error messages and their solutions.
Provides general troubleshooting tips for unit issues.
Lists troubleshooting tips for Caller ID functionality.
