Preparation
12 For assistance, please visit http://www.panasonic.com/consumersupport
If you subscribe to a DSL service
L Please attach a noise filter (contact your
DSL provider) to the telephone line
between the base unit and the telephone
line jack in the event of the following:
– Noise is heard during conversations.
– Caller ID features (page 32) do not
function properly.
Battery installation
1 Insert the battery (1), and press it
down until it snaps into the
compartment (2).
2 Close the handset cover.
Telephone
line cord
Noise filter
(For DSL users)
To single-line telephone
jack (RJ11C)
1
2
TG5571_5576.book Page 12 Friday, June 10, 2005 6:46 PM
To Next Page
Loading...
