Programmable Settings
58 For assistance, please visit http://www.panasonic.com/consumersupport
Base unit ringer tone
You can also change the base unit ringer
tone from the base unit (page 26).
1 Press {MENU} (center of joystick).
2 Scroll to N, then press {SELECT}.
3 Scroll to “Set base unit”, then press
{SELECT}.
4 Scroll to “Ringer tone”, then press
{SELECT}.
5 Push the joystick up or down repeatedly
to select the desired setting.
L If the ringer volume has been turned
off, the base unit will not ring.
6 Press {SAVE}, then press {OFF}.
Base unit interrupt tone
This tone lets you know when you receive
a call while you are on an intercom call or
monitoring a room.
“2”: The tone will sound 2 times.
“On”: The tone will sound for as long as the
line rings.
“Off”: Turns this feature off.
1 Press {MENU} (center of joystick).
2 Scroll to N, then press {SELECT}.
3 Scroll to “Set base unit”, then press
{SELECT}.
4 Scroll to “Interrupt tone”, then
press {SELECT}.
5 Push the joystick up or down repeatedly
to select the desired setting.
6 Press {SAVE}, then press {OFF}.
Base unit Talking Caller ID
You can turn the Talking Caller ID feature
(page 32) on or off for the base unit.
1 Press {MENU} (center of joystick).
2 Scroll to N, then press {SELECT}.
3 Scroll to “Set base unit”, then press
{SELECT}.
4 Scroll to “Talking CallerID”, then
press {SELECT}.
5 Push the joystick up or down repeatedly
to select “On” or “Off”.
6 Press {SAVE}, then press {OFF}.
Canceling the handset
registration
If you no longer need to use the handset or
if you want to use the handset with a
different base unit of the same model, it is
necessary to cancel the handset’s
registration from the current base unit.
Important:
L Before canceling, make sure the base
unit is not being used.
L Have the handset and base unit near
each other when canceling the handset.
1 Press {MENU} (center of joystick).
2 Scroll to N, then press {SELECT}.
3 Scroll to “Registration”, then press
{SELECT}.
4 Scroll to “Deregistration”, then
press {SELECT}.
5 Enter {3} {3} {5}.
6 Press {OK}.
L The handset’s extension number (!
to )) will disappear from the display.
TG5571_5576.book Page 58 Friday, June 10, 2005 6:46 PM
To Next Page
Loading...
