Panasonic KX-TG6461AL

Getting started
13
1 8 (middle soft key)
2 {V}/{^}: “Handset Setup” i M
3 {V}/{^}: “Display Setup” i M
4 {V}/{^}: “Language” i M
5 {V}/{^}: Select your desired language. i
M i {ih}
If you select a language you cannot read
Important:
L If the unit is not in standby mode, press {ih} .
1 8 (middle soft key)
2 {^} 4 times i M
3 {V} 2 times i M 2 times i
{V}/{^}: Select your desired language. i
M i {ih}
Date and time
1
8 (middle soft key)
2 {V}/{^}: “Handset Setup” i M
3 {V}/{^}: “Time Settings” i M
4 {V}/{^}: “Set Date/Time” i M
5 Enter the current date, month, and year. i
M
Example: 15 July, 2009
{1}{5} {0}{7} {0}{9}
6 Enter the current hour and minute.
Example: 9:30
{0}{9} {3}{0}
L You can select 24-hour or 12-hour clock
format (“AM” or “PM”) by pressing {*}.
7 M i {ih}
Note:
L To correct a digit, press {^} or {V} to move the
cursor to the digit, then make the correction.
L The date and time may be incorrect after a
power failure. In this case, set the date and time
again.
Y Handset
Important:
L When the language selection is displayed
after installing the batteries for the first time,
perform step 5.
Y Handset
TG6461AL(e).book Page 13 Tuesday, June 23, 2009 8:48 AM