Useful Information
40
Wall mounting
Base unit
Charger
Wall mounting template
1 Connect the AC adaptor and telephone line
cord. Tuck the telephone line cord inside the
wall mounting adaptor, then push it in the
direction of the arrow.
L The word “UP” should face upward.
2 Connect the telephone line cord. Drive the
screws (not supplied) into the wall. Mount the
unit, and then slide it down. Connect the AC
adaptor to power outlet (page 8).
1 Drive the screws (not supplied) into the wall. 2 Mount the charger (A), then slide it down (B)
and to the right (C) until it is secure.
■ Base unit ■ Charger
83 mm
Screws
25 mm
Hooks
Screws
A
B
C
83 mm 25 mm
TG6461AL(e).book Page 40 Tuesday, June 23, 2009 8:48 AM
To Next Page
Loading...
