Getting started
8
Setting up
Connections
L Use only the supplied Panasonic AC adaptor
PQLV219AL.
■ Base unit
*For DSL/ADSL service users
■ Charger
Battery installation
L USE ONLY Ni-MH batteries AAA (R03) size.
L Do NOT use Alkaline/Manganese/Ni-Cd
batteries.
L Confirm correct polarities (S, T).
Battery charge
Charge for about 7 hours.
L When the batteries are fully charged, the charge
indicator goes off.
L When the language selection is displayed,
see page 12.
Use only the supplied telephone line cord.
To socket
DSL/ADSL filter* (Not supplied)
“Click”
(220-240 V AC,
50/60 Hz)
Hooks
(220-240 V AC, 50/60 Hz)
L When the language selection is displayed,
see page 13.
Rechargeable Ni-MH ONLY
Charge indicator
Confirm
“Charging”
is displayed.
TG6461AL(e).book Page 8 Tuesday, June 23, 2009 8:48 AM
To Next Page
Loading...
