5 MSELECTN A MOFFN
Erasing entries
Erasing an entry
Handset / Base unit
*1
*1 KX-TG6641 series: page 3
1 Find the desired entry (page 23).
2 MERASEN A MCN / MDN: “Yes”
3 Proceed with the operation for your
unit.
Handset: MSELECTN A MOFFN
Base unit: M
N A MnN (EXIT)
Erasing all entries
Handset
1 M
N A MMENUN
2 MCN / MDN: “Erase all” A
MSELECTN
3 MCN / MDN: “Yes” A MSELECTN
4 MCN / MDN: “Yes” A MSELECTN
5 MOFFN
Base unit
Available for:
KX-TG6641 series (page 3)
1 M N A MERASEN
2 MCN / MDN: “Yes” A M
N
3 MCN / MDN: “Yes” A M
N
4 MnN (EXIT)
Chain dial
This feature allows you to dial phone
numbers in the phonebook while you are
on a call. This feature can be used, for
example, to dial a calling card access
number or bank account PIN that you
have stored in the phonebook, without
having to dial manually.
Handset / Base unit
*1
*1 KX-TG6641 series: page 3
1 Proceed with the operation for your
unit.
During an outside call:
Handset: MMENUN A
MCN / MDN: “Phonebook” A
MSELECTN
Base unit: M
N
2 MCN / MDN: Select the desired entry.
3 Proceed with the operation for your
unit.
Handset:Press MCALLN to dial the
number.
Base unit:Press M
N to dial the
number.
Note:
R When storing a calling card access
number and your PIN in the
phonebook as one phonebook entry,
press MPAUSEN to add pauses after
the number and PIN as necessary
(page 17).
R If you have rotary/pulse service, you
need to press MGN (TONE) before
pressing MMENUN on the handset or
M N on the base unit in step 1to
change the dialing mode temporarily
to tone. When adding entries to the
phonebook, we recommend adding
MGN (TONE) to the beginning of
phone numbers you wish to chain dial
(page 22).
24
For assistance, please visit http://www.panasonic.com/help
Shared Phonebook
To Next Page
Loading...
