Sub-menu 1 Sub-menu 2 Settings Code
Set tel line
Set dial mode
*1
1: Pulse
2:<Tone>
#120 15
Set flash time
*1
,
*12
0: 900 ms
1:<700 ms>
2: 600 ms
3: 400 ms
4: 300 ms
5: 250 ms
G: 200 ms
#: 160 ms
6: 110 ms
7: 100 ms
8: 90 ms
9: 80 ms
#121 19
Set line mode
*1
,
*13
1: A 2:<B> #122 –
Call sharing
*1
– 1:<On>0: Off #194 20
Registration Register handset
– #130 34
Deregistration
*8
– #131 34
Power failure
*1
–
#15
2
20
Change language Display
1:<English>
2: Español
#110 14
Voice prompt
*1
(Change language)
1:<English>
2: Español
#112 15
Main menu: “Customer support”
*14
(Code: #680)
*1 If you program these settings using one of the handsets, you do not need to
program the same item using another handset.
*2 You can select the recording time “1 min”, “3 min”, and “Greeting only”.
“Greeting only” is not displayed when scrolling through the display menus. It
is only available in direct commands (page 44).
*3 This feature allows the unit to automatically adjust the date and time each time
caller information including date and time is received.
To turn this feature on, select “Caller ID auto”. To turn this feature off,
select “Manual”. (Caller ID subscribers only)
To use this feature, set the date and time first (page 14).
*4 Ringer volume cannot be turned off for alarm, intercom calls, and paging.
*5 If you subscribe to a distinctive ring service (such as IDENTA-RING), select a
tone (tone 1 to 5). If you select a melody, you cannot distinguish lines by their
ringers.
30
For assistance, please visit http://www.panasonic.com/help
Programming
1: On 0:<Off>
To Next Page
Loading...
