To Next PageTo Next PageWhy does my Panasonic KX-TG6711NZ base unit not ring?
If your Panasonic Cordless Telephone base unit does not ring, the ringer volume is likely turned off. Adjust the ringer volume on the base unit.
Why does my Panasonic KX-TG6711NZ Cordless Telephone handset beep and/or flash?
If the handset beeps and/or flashes, it indicates that the battery charge is low. You should fully charge the batteries.
Why has the time on my Panasonic Cordless Telephone shifted?
If the time on your Panasonic Cordless Telephone has shifted, incorrect time information from the incoming Caller ID may be changing the time. Set the time adjustment to 'Manual' (off).
Why can't I register a handset to the base unit of my Panasonic KX-TG6711NZ?
If you cannot register a handset to a base unit of your Panasonic Cordless Telephone, the maximum number of handsets (6) may already be registered. Cancel unused handset registrations from the base unit. Also, you might have entered the wrong PIN. If you forget your PIN, contact an authorized service center.
Why can't I make a call on my Panasonic Cordless Telephone?
If you cannot make a call on your Panasonic Cordless Telephone, and you are using a BT double adapter, remove it and connect the unit directly to the phone wall socket. If it then works, check or replace the adapter. Also, you may have dialed a call-restricted number, the key lock feature may be turned on (turn it off), or the unit is not designed for rotary/pulse dialing services.
What to do if my Panasonic KX-TG6711NZ batteries still flash after fully charging?
If you fully charged the batteries of your Panasonic Cordless Telephone, but the phone still flashes or the operating time seems shorter, clean the battery ends and the charge contacts with a dry cloth and charge again. If the problem persists, it may be time to replace the batteries.
Why does my Panasonic Cordless Telephone have noise or sound cutting in and out?
If you are experiencing noise or the sound cuts in and out on your Panasonic Cordless Telephone, you may be using the handset or base unit in an area with high electrical interference. Try re-positioning the base unit and use the handset away from sources of interference. Also, try moving closer to the base unit. If you use a DSL/ADSL service, contact your provider to have a DSL/ADSL Splitter installed.
What to do if my Panasonic KX-TG6711NZ Cordless Telephone handset display is blank?
If the handset display of your Panasonic Cordless Telephone is blank, turn the power on.
What to do if my Panasonic KX-TG6711NZ unit does not work?
If your Panasonic Cordless Telephone unit does not work, ensure the batteries are installed correctly and fully charged. Check all connections. Unplug the base unit’s AC adapter to reset the unit, turn off the handset, reconnect the adapter, turn on the handset, and try again. The handset may not be registered to the base unit; register it.
Why does my Panasonic KX-TG6711NZ Cordless Telephone handset not ring?
If your Panasonic Cordless Telephone handset does not ring, the ringer volume might be turned off. Adjust the ringer volume. Also, check if night mode is turned on and turn it off if necessary.
General| Type | Cordless Telephone |
|---|---|
| Number of Handsets | 1 |
| Frequency | 1.9 GHz |
| DECT | Yes |
| GAP compatible | Yes |
| Caller ID | Yes |
| Phonebook Capacity | 50 entries |
| Redial memory | 10 numbers |
| Call Block | Yes |
| Intercom | Yes |
| Answering Machine | No |
| Display | LCD |
| Display Colour | Black and White |
| Backlit Display | Yes |
| Ringer melodies | 10 |
| Talk Time | Up to 15 hours |
| Battery type | Ni-MH |
| Power Source | AC Adapter |
| Wall Mountable | Yes |
| Color | Black |
| Range | Up to 300m outdoor |
| Dimensions (Handset) | Approx. 48 mm x 29 mm x 164 mm |
