Panasonic KX-TG7100 - Date and Time; Display Language; Symbols Used in These Operating Instructions; Turning the Power On;Off

Preparation
11
Helpline Tel. No.: U.K. 08700 100 076 R.O.I. 01289 8333
this case, place the handset on the base
unit or charger and charge for at least 7
hours.
Turning the power on/off
Power on
Press {ih} for about 1 second.
Power off
Press {ih} for about 2 seconds.
Symbols used in these
operating instructions
Display language
1 {j/OK}
2 Press {^} or {V} to select “Handset
Setup”. i {>}
3 Press {^} or {V} to select “Display
Setup”. i {>}
4 Press {^} or {V} to select “Select
Language”. i {>}
5 Press {^} or {V} to select the desired
language. i {>} i {ih}
Note:
L If you select a language you cannot read,
press {ih}, press {j/OK}, press {^} 3
times, press {>}, press {V} 2 times, press
{>}, press {V}, press {>}, select the
desired language, press {>}, then press
{ih}.
Date and time
1 {j/OK}
2 Press {^} or {V} to select “Handset
Setup”. i {>}
3 KX-TG7100/KX-TG7102/KX-TG7103
Press {^} or {V} to select “Set Date &
Time”. i {>}
KX-TG7120/KX-TG7122/KX-TG7123
Press {^} or {V} to select “Time
Settings”. i {>} i Press {^} or
{V} to select “Set Date & Time”. i
{>}
4 Enter the current day, month, and year.
Example: 17 May, 2006
{1}{7} {0}{5} {0}{6}
5 Enter the current hour and minute.
Example: 3:30 PM
{0}{3} {3}{0} i Press {*} until
“03:30 PM” is displayed.
6 {j/OK} i {ih}
Note:
L To correct a digit, press {<} or {>} to
move the cursor, then make the
correction.
L The date and time may be incorrect after a
power failure. In this case, set the date
and time again.
Symbol Meaning
{j/OK} Press {j/OK}.
i Proceed to the next operation.
“ ” Select the words in quotations
shown on the display (e.g.,
“Handset Setup”) by
pressing {^} or {V}.
TG7100-7120E(e).book Page 11 Tuesday, July 4, 2006 3:29 PM