Panasonic KX-TG7100 - Listening to Messages

Answering System Features (KX-TG7120/KX-TG7122/KX-TG7123)
24
Helpline Tel. No.: U.K. 08700 100 076 R.O.I. 01289 8333
Erasing the greeting message
If you erase your own greeting message, the
unit will play a prerecorded greeting
message for callers.
1 {j/OK} i “Answer System” i
{>}
2 “Erase Message” i {>}
3 “Erase Greeting” i {>}
4 “Yes” i {>} i {ih}
Listening to messages
Messages are stored and played back
chronologically, from oldest message to
newest.
Listening to new/all messages
When you have new messages:
– {6} on the base unit flashes
– the message indicator on the handset
flashes if the message alert feature (page
17) has been turned on
Note:
L To adjust the speaker volume during
playback, press {^} or {V}.
Using the base unit
Press {6}.
L If new messages have been recorded, the
base unit plays back new messages.
L If there are no new messages, the base
unit plays back all messages.
Note:
L After playing back all of the new
messages, {6} will stop flashing but the
answer on indicator will remain lit up when
the answering system is turned on.
Using the handset
1 {j/OK} i “Answer System” i
{>}
2 “Play New Msg.” or “Play All
Msg.” i {>}
Repeating, skipping, stopping,
erasing a message during
playback
L To repeat a message during playback:
– for the base unit, press {7}
– for the handset, press {<}
If pressed within the first 5 seconds of a
message, the previous message will be
played.
L To skip a message during playback:
– for the base unit, press {8}
– for the handset, press {>}
L To stop a message during playback:
– for the base unit, press {■}
– for the handset, press {9}
L To erase a message during playback:
– for the base unit, press {4}
– for the handset, press {*}{4}
Erasing all messages
Using the base unit
Press {4} 2 times.
Using the handset
1 {j/OK} i “Answer System” i
{>}
2 “Erase Message” i {>}
3 “Erase All” i {>}
4 “Yes” i {>} i {ih}
TG7100-7120E(e).book Page 24 Tuesday, July 4, 2006 3:29 PM