Panasonic KX-TG7230E - Battery Installation and Charging

Preparation
12
Helpline Tel. No.: U.K. 0844 844 3898 R.O.I. 01289 8333
information about connection
possibilities.
Location
L For maximum distance and noise-free
operation, place your base unit:
– away from electrical appliances
such as TVs, radios, personal
computers, or other phones.
– in a convenient, high, and central
location.
Battery installation and
replacement
Important:
L Use only the supplied rechargeable
batteries noted on page 5, 8.
L USE ONLY rechargeable Ni-MH
batteries AAA (R03) size.
L Do NOT use Alkaline/Manganese/Ni-
Cd batteries.
L Ensure correct polarities (S, T)
when installing the batteries.
L Wipe the battery ends (S, T) with a
dry cloth.
L When installing the batteries, avoid
touching the battery ends (S, T) or
the unit contacts.
L When replacing batteries, we
recommend using the Panasonic
rechargeable batteries noted on page
6, 8.
1 Press the notch on the handset
cover firmly and slide it in the
direction of the arrow.
2 Insert the batteries negative (T)
end first. Close the handset cover.
Note:
L When replacing batteries, remove the
old batteries.
Battery charge
Place the handset on the base unit or
charger for about 7 hours before
initial use.
When charging, “Charging” will be
displayed.
Rechargeable Ni-MH ONLY
TG7210-7230E(e).book Page 12 Tuesday, October 16, 2007 12:59 PM