EasyManua.ls Logo

Panasonic KX-TG7230E - Managing Greeting Messages; Listening to and Managing Messages

Panasonic KX-TG7230E
44 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Answering System Features
25
Helpline Tel. No.: U.K. 0844 844 3898 R.O.I. 01289 8333
will not be recorded and the unit will play
a different pre-recorded greeting
message asking callers to call again.
Playing back the greeting
message
1
{j/OK}
2 {^}/{V}: Answer System i
{>}
3 {^}/{V}: Play Greeting i
{>}
4 {ih }
Erasing the greeting message
If you erase your own greeting message,
the unit will play a pre-recorded greeting
message for callers.
1 {j /OK}
2 {^}/{V}: Answer System i
{>}
3 {^}/{V}: Erase Message i
{>}
4 {^}/{V}: Erase Greeting i
{>}
5 {^}/{V}: Yes i {>} i {ih}
Listening to messages
Listening to new/all
messages
When you have new messages, {6} on
the base unit flashes.
Note:
L When {6} on the base unit flashes
rapidly, the message memory is full
(“Memory capacity”, page 24).
Using the base unit
Press {6}.
L If new messages have been recorded,
the base unit plays back new
messages.
L If there are no new messages, the
base unit plays back all messages.
Using the handset
1 {j /OK}
2 {^}/{V}: Answer System i
{>}
3 {^}/{V}: Play New Msg. or
Play All Msg. i { >}
Operations during playback
To adjust the speaker volume:
for the base unit, press {>} or {<}
for the handset, press {^} or {V}
To repeat a message:
for the base unit, press {7}
for the handset, press {<}
If pressed within the first 5 seconds of
a message, the previous message will
be played.
To skip a message:
for the base unit, press {8}
for the handset, press {>}
To stop a message:
for the base unit, press {}
for the handset, press {9}
To erase a message:
for the base unit, press {4}
for the handset, press {*}{4}
TG7210-7230E(e).book Page 25 Tuesday, October 16, 2007 12:59 PM

Other manuals for Panasonic KX-TG7230E

Related product manuals