Sub-menu 1 Sub-menu 2 Settings Code
Register Register H.set
(H.set: handset)
– #130 32
Cancel Register
*
2
– #131 32
Language Display
<E
nglish> #110 15
Main menu: “C
aller List”
Operation Code
Viewing the caller list. #213 34
Main menu: “K
ey Finder”
*7
Sub-menu 1 Sub-menu 2 Settings Code
Search
– – #655 –
Battery Check
– –
Main menu: “R
inger Setup”
*18
Sub-menu 1 Sub-menu 2 Settings Code
Ringer Volume Handset
0-6: O
ff-6 <6> #160 17
Base Unit
*
1
0-6: O
ff-6 <3> #G160 –
Ringtone
*
4, *5
(Handset)
– <R
ingtone 1> #161 –
Night Mode On/Off
1: O
n 0: <Off> #238 29
Start/End
<23:00/06:00> #237 29
Ring Delay
1: 3
0 sec.
2: <60 sec.>
3: 90 sec.
4: 120 sec.
0: No Ringing
#239 29
First Ring
*
1, *6
– 1:
<On> 0: Off #173 –
*1 If you program these settings using one of the handsets, you do not need to program the
s
ame item using another handset.
*2 This menu is not displayed when scrolling through the display menus. It is only available in
direct command code.
*3 This feature allows the unit to automatically adjust the date and time each time caller
information including date and time is received.
To turn this feature on, select “Caller ID”. To turn this feature off, select “Manual”.
(Caller ID subscribers only)
To use this feature, set the date and time first (page 16).
*4 The ringer tone may continue to play for several seconds even if the caller has already hung
up. You may either hear a dial tone or no one on the line when you answer the call.
*5 The preset melodies in this product (“Ringtone 3” - “Ringtone 20”) are used with
permission of © 2012 Copyrights Vision Inc.
Helpline Tel. No.: U.K. 0344 844 3899 Ireland 01289 8333
27
Programming
To Next Page
Loading...
