Getting Started
14
Helpline Tel. No.: U.K. 0844 844 3898 R.O.I. 01289 8333
Initial settings
Display language
1
1 (centre of joystick) i N i
M
2 {V}/{^}: “Display Setup” i
M
3 {V}/{^}: “Language” i M
4 {V}/{^}: Select your desired
language. i M i {ih}
Note:
L If you select a language you cannot
read: {ih} i 1 i N i M
i Push the joystick down 2 times.
i M i Push the joystick down 5
times. i M i {V}/{^}: Select
your desired language. i M i
{ih}
Date and time
1
1 (centre of joystick) i N i
M
2 {V}/{^}: “Time Settings” i
M
3 {V}/{^}: “Set Date/Time” i
M
4 Enter the current date, month, and
year. i M
Example: 15 July, 2009
{1}{5} {0}{7} {0}{9}
L You can select the date format by
pressing {#}:
– dd-mm-yy (date-month-year)
– mm-dd-yy
5 Enter the current hour and minute.
i M
Example: 9:30
{0}{9} {3}{0}
L You can select 24-hour or 12-hour
clock format (“AM” or “PM”) by
pressing {*}.
6 {ih}
Note:
L To correct a digit, push the joystick left
or right to move the cursor to the digit,
then make the correction.
L The date and time may be incorrect
after a power failure. In this case, set
the date and time again.
Symbol meaning:
Example: {V}/{^}: “Off”
Push the joystick down or up to
select the words in quotations.
Important:
L When the language selection is
displayed after installing the
batteries for the first time, perform
step 4.
TG8421E(e).book Page 14 Tuesday, December 16, 2008 8:03 AM
To Next Page
Loading...
