Panasonic KX-TG9331

Preparation
Connections
Connect the AC adaptor cord (0) by
pressing the plug firmly
(8). Connect
the telephone line cord until it clicks into
the base unit and telephone line jack
(0)·
Base unit
• Use only the supplied Panasonic AC
adaptor PQLV207.
• Use only the supplied telephone line
cord. Using another telephone line
cord may not allow the unit to work
properly.
To single-line
telephone jack
(RJ11C)
"~F=====:!I
(120 V AC,
60 Hz)
..
Hook
Charger
Available for:
KX- TG9332/KX- TG9333/
KX-
TG9334/KX- TG9342/
KX-
TG9343/KX- TG9344
• Use only the supplied Panasonic AC
adaptor PQLV209.
Note:
• The AC adaptor must remain
connected at all times. (It is normal for
the adaptor to feel warm during use.)
• The AC adaptor should
be connected
to a vertically oriented or floor-
mounted AC outlet. Do not connect
the AC adaptor to a ceiling-mounted
AC outlet, as the weight ofthe adaptor
may cause it to become disconnected.
During a power failure
The unit will not work during a power
failure. We recommend connecting a
corded-type telephone (without AC
adaptor) to the same telephone line or to
the same telephone line jack using a
Panasonic T-adaptor (page 6).
Emergency power
can be supplied to the
unit by connecting a Panasonic battery
back-up power supply noted on page
6.
12 For assistance, please visit http://www.panasonic.com/help