Panasonic KX-TG9331

Making/Answering Calls
- Press [~] on the handset, then
press
[SP·PHONE] on the base
unit.
- If the handset is on the base unit,
simply lift
it.
Adjusting the speaker volume
Press [~] or [,] repeatedly while
talking.
Redialing the last number dialed
[SP.PHONE] ~ [REDIAL]
Answering calls
Using the handset
When a call is being received, the ringer
indicator flashes rapidly.
1 Lift the handset and press [~] or
[~] when the unit rings.
•
You can also answer the call by
pressing any dial key from
[0] to
[9], [*], or [0]. (Any key
answer feature)
2 When you finish talking, press
[OFF] or place the handset on the
base unit or charger.
Auto talk
You can answer calls simply by lifting the
handset off the base unit or charger.
You
do not need to press [~]. To turn this
feature on, see page 25.
Adjusting the handset ringer volume
Press [~] or [,] repeatedly to select the
desired volume while the handset is
ringing for
an incoming call.
Note:
• You can also program the handset
ringer volume beforehand (page 26).
Temporary handset ringer off
While the handset is ringing for a call,
you can turn the ringer offtemporarily by
pressing
[OFF].
Adjusting the base unit ringer
volume
Press [~] or [,] repeatedly to select the
desired volume.
•
To turn the ringer off, press and hold
[,] until the unit beeps 2 times.
Using the base unit
Available for:
KX-TG9341/KX- TG9342/
KX-TG9343/KX- TG9344
When a call is being received, the IN
USE indicator flashes rapidly.
1 Press [SP.PHONE] when the unit
rings.
2 Speak into the MIC.
3 When you finish talking, press [SP.
PHONE].
18 For assistance, please visit http://www.panasonic.com/help