3 Wait for the paged party to answer.
• If the paged party does not
answer, press
[~]
to return
to
the outside call.
4 To
complete
the
transfer:
Press
[OFF].
• The outside call
is
being routed
to
the destination unit.
To
establish
a
conference
call:
Press
[Conf].
•
To
leave the conference, press
[OFF].
The other parties can
continue the conversation.
•
To
put the outside call on hold,
press
[HOLD].
To
resume the
conference, press
[Conf].
• KX-TG9341/KX-TG9342/
KX-
TG9343/KX-
TG9344
1 During
an
outside call, press
[INTERCOM] to put the calion hold.
2
To
page a specific handset, enter the
handset number.
To
page all handsets, press
[0]
or
wait for a few seconds.
3 Wait for the paged party to answer.
• If the paged party does not
answer, press [INTERCOM] to
return to the outside call.
4 To
complete
the
transfer:
Press [SP-PHONE].
• The outside call
is
being routed
to
the handset.
To
establish
a
conference
call:
Press
[CONF].
•
To
leave the conference, press
[SP-PHONE]. The other 2 parties
can continue the conversation.
•
To
put the outside call on hold,
press
[HOLD].
To
resume the
conference, press
[CONF].
Intercom/Locator
Answering
a
transferred
call
Press
[~]
to answer the page.
• KX-
TG9341/KX-
TG9342/
KX-TG9343/KX-TG9344
Press [SP-PHONE] to answer the
page.
Note
for
handset
and
base
unit:
• After the paging party disconnects,
you can talk to the outside caller.
Handset locator
You
can locate a misplaced handset by
paging
it.
1 Base
unit:
[LOCATOR]
• All registered handsets beep for 1
minute.
2
To
stop paging:
Base
unit:
Press [LOCATOR].
Handset:
Press [INTERCOM], then press
[OFF].
Note:
• When the ringer volume for outside
calls
is
set to off (page 26), the
handset rings at a low level for paging.
For assistance, please visit http://www.panasonic.com/help 43
To Next Page
Loading...
