Panasonic KX-TG9331

Programming
;Fe.ai~iJ'~e;';-(lr, .,
;~ ;., ; ',-' - " ' " .' ", . '. I
Ring count
Ringer tone*4, *5
(Handset)
Ringer volume
(Handset)
Set dial mode
Set flash
time*6
Set line mode*7
Store VM
access#
Talking
CallerID
(Handset)
Talking
CallerID
(Base unit)
Time
adjustment*8
(Caller 10
subscribers only)
V.H. access
VM tone detect
Voice prompt
(Change language)
[2][1][1]
[1][6][1]
[1 ][6][0]
[1][2][0]
[1][2][1]
[1][2][2]
[3][3][1]
[1 ][6][2]
[2][2][6]
[3][3][0]
[3][3][2]
[1][1][2]
[2]-[7]: 2-7 rings <4>
[0]: Toll saver
[1 ]-[3]: Tone <1>-3
[4]-[7]: Melody 1-4
[1]: Low [2]: Medium
[3]: <High> [0]: Off
[1]: Pulse
[2]: <Tone>
[1]: <700ms>
[2]: 600ms
[3]: 400ms
[4]: 300ms
[5]: 250ms
[6]: 110ms
[7]: lOOms
[8]: 90ms
[1]: A [2]: <B>
[1]: <On> [0]: Off
[1]: <On> [0]: Off
[1]: <Caller ID
[auto]>
[0]: Manual
[1]: <On> [0]: Off
[1]: <English>
[2]: Espanol
•
•
•
•
•
•
•
•
38
15
19
40
31
31
41
40
15
*1 If "System setting" column is checked, you do not need to program the same item
using another handset.
*2 If you subscribe to Caller
10 service and want to view the caller's information after
lifting up the handset to answer a call, turn
off this feature.
*3 Turn this feature
off if you prefer not to hear key tones while you are dialing or
pressing any keys, including confirmation tones and error tones.
*4
If you subscribe to a distinctive ring service (such as 10ENTA-RING), select a tone
(tone 1 to 3).
If you select a melody, you cannot distinguish lines by their ringers.
26 For assistance, please visit http://www.panasonic.com/help