- After the call
is
ended, the phone
number
of
the caller, when reviewed
from the Caller list,
is
displayed
in
the
same Format as the Edited Number.
For example, you can use this feature to
set the unit to ignore the area code
of
callers
in
your area code,
so
that you can
call these local numbers using caller
information without dialing the area
code.
To
activate this feature, you must edit
an
item
in
the caller list, then call that
number. After that, phone numbers from
that caller's area code are edited
automatically.
This feature can be turned
on
or off
(page 25).
Note:
• Phone numbers from the 4 most
recently edited area codes are
automatically edited.
• If you move to another area, you can
turn this feature offto erase previously
edited area codes.
To
use this feature
again, turn it
on
and reprogram the
area codes you want to edit once
again.
Erasing
selected
caller
information
1
[View
CID]
2
[,
]/[!]:
Select the desired entry.
3
[Erase]
~
[Yes]
~
[OFF]
Erasing
all
caller
information
1
[View
CID]
2
[All
erase]
~
[Yes]
Storing
caller
information
into
the
phonebook
1
[View
CID]
Caller ID Service
2
[,
]/[!]:
Select the desired entry.
~
[Select]
•
To
edit the number, press
[Edit]
repeatedly until the phone
number
is
shown
in
the desired
format.
3
[Save]
4
[,
]/[!]:
"Phonebook"
~
[Select]
• Ifthere
is
name information for the
caller, go to step
6.
5 Enterthe name (16 characters max.;
page 21).
~
[Next]
~
[Save]
6
[OFF]
For assistance, please visit http://www.panasonic.com/help 33
To Next Page
Loading...
