Preparation
Note:
• Actual battery performance depends
on
a combination
of
how often the
handset is
in
use and how often it
is
not
in
use (standby).
• Even after the handset is fully
charged, the handset can be left on
the base unit or charger without any ill
effect
on
the batteries.
• The battery level may not be
displayed correctly after you replace
the batteries. In this case, place the
handset on the base unit or charger
and let it charge for at least 7 hours.
Setting
up
the
unit
before use
Display language
You
can select either
"English"
or
"Espaiiol"
as the display language.
The default setting is
"English".
1 [MENU]
~
[U][1][1][0]
2 [']/[A]: Select the desired setting.
3 Press the right soft key to save.
~
[OFF]
Press
[,]
or
[A]
to
select the words
in
quotations.
Example:
[, ]/[
A]:
"Of
f"
" "
3 hours max.While using the
clarity booster
feature (page
20)
Symbols
used in these
operating
instructions
[ ]
" "
The words
in
the
brackets indicate
button names/soft key
names on the handset
and base unit.
Example:
Unit keys:
[~],
[OFF]
Soft keys:
[View
CID],
[Phonebook]
Proceed to the next
operation.
The words
in
quotations indicate the
menu on the display.
Example:
"Alarm"
Voice
guidance
language
You can select either
"English"
or
"Espaiiol"
as the voice guidance
language
of
the answering system. This
setting also determines the voice
announcement language
of
the talking
alarm clock and talking battery alert. The
default setting is
"English".
1 [MENU]
~
[U][1][1][2]
2 [']/[A]: Select the desired setting.
3
[Save]
~
[OFF]
Dialing mode
If you cannot make calls, change this
setting according to your telephone line
service. The default setting is
"Tone".
"Tone":
For tone dial service.
"Pulse":
For rotary/pulse dial service.
1 [MENU]
~
[U][1][2][0]
2 [']/[A]: Select the desired setting.
For assistance, please visit http://www.panasonic.com/help
15
To Next Page
Loading...
