Answering
System
m
Erasing all messages
Press
[ERASE]
2 times while the unit is
not being used.
Listening
to
messages
using
the handset
When
new
messages have been
recorded:
-
"New
message"
is displayed.
- The message indicator
on
the handset
flashes slowly if the message alert
feature
is
turned on (page 39).
1
[MENU]
2 [Y]/[.]:
"Message
play"
~
[Select]
•
If
new messages have been
recorded, the handset plays back
new messages.
•
If
there are no new messages, the
handset plays back all messages.
3 When finished, press [OFF].
Note:
•
To
switch to the receiver, press
[~].
Operating the answering
system
You can also operate the answering
system by pressing dial keys on the
handset.
-K.ey
.
Operati0l'l'
"...
.
[.]
or
[Y]
Adjust the
receiver/speaker
volume
[1]
or [
~]
Repeat message
(during
playbackf
1
[2]
or
[.]
Skip message
(during playback)
•
ill
~
.•....
···.U~'i.;
..••...
.;Qp~tati·o~···
......;
.'
....
[4] Play new messages
[5]
Play all messages
[8]
Turn answering
system on
[9]
Stop playback*2
[0] Turn answering
system off
[*][4]
or
Erase currently
[Erase]
playing message
[*
][5]
Erase all messages
*1
If
pressed within the first 5
seconds
of
a message, the
previous message is played.
*2
To
resume operation, press a
command key within 15 seconds,
or the voice guidance will start.
Voice guidance
Ifyou do not press any dial keys after the
last message is played back, the
handset's voice guidance starts.
Operate the answering system by
following the guidance as necessary.
Calling back (Caller
10
subscribers
only)
If
caller information was received for the
call, you can call the caller back while
listening to a message.
1 Press
[Select]
during playback.
•
To
edit the number before calling
back, press
[Edit]
repeatedly
until the phone number is shown
in
the desired format (page 32).
2
[Call]
36 For assistance, please visit http://www.panasonic.com/help
To Next Page
Loading...
