Useful
Information
Caller
10/Taiking
Caller
10
'~~~p~l,m~E
_
Caller information is not
displayed.
Caller information is displayed
or
announced late.
Caller information is not
announced.
The
caller lisUincoming phone
numbers are not edited
automatically.
•
You
need to subscribe to Caller
10
service.
Contact your service provider/telephone
company for details.
• If your unit is connected to any additional
telephone equipment such as a Caller
10
box
or
cordless telephone line jack, plug the unit
directly into the wall jack.
• If you use a DSLIADSL service,
we
recommend connecting a DSLIADSL filter
between the base unit and the telephone line
jack. Contact your DSLIADSL provider for
details.
• The name display service may not be
available
in
some areas. Contact your service
provider/telephone company for details.
• Other telephone equipment may be interfering
with this unit. Disconnect the other equipment
and try again.
• Depending on your service
provider/telephone company, the unit may
display
or
announce the caller's information at
2nd ring
or
later.
• Move closer to the base unit.
• The handset
or
base unit's ringer volume is
turned off. Adjust it (page 18, 26).
• The Talking Caller
10
feature is turned off.
Turn it on (page 26).
• The number
of
rings for the answering system
is set to
"2"
or
"Toll
saver".
Select a
different setting (page 38).
• If the base unit and another handset are
having an intercom call, your handset does
not announce caller information.
• The Caller
10
number auto edit feature is
turned off. Turn it on and try again (page 25).
• You need to call back the edited
number
to
activate Caller
10
number auto edit.
For assistance, please visit http://www.panasonic.com/help
49
To Next Page
Loading...
