Usefullnformafion
I cannot operate the answering
system remotely.
While recording a greeting
message
or
listening to
messages, the unit rings and
recording stops.
Liquid
damage
;~t9,.
Liquid
or
other form
of
moisture
has entered the handset/base
unit.
•
You
are entering the wrong remote access
code. If you forgot the remote access code,
store a new remote access code (page 37).
• Press each key firmly.
• The answering system is turned off. Turn it on
(page 38).
•
You
are using a rotary/pulse telephone. Try
again using a touch-tone phone.
• A call is being received. Answer the call and
try again later.
;i~."·.j~j~~".
• Disconnectthe
AC
adaptor and telephone line
cord from the base unit. Remove the batteries
from the handset and leave to dry for at least
3 days. After the handset/base unit are
completely dry, reconnect the AC adaptor and
telephone line cord. Insert the batteries and
charge fully before use.
Caution:
•
To
avoid permanent damage, do not use a microwave oven to speed up the drying
process.
For assistance, please visit http://www.panasonic.com/help
51
To Next Page
Loading...
